Rexroth
Axial Piston Pump A10 VSO Series 32
  • Sizes: 71, 100, 140 (28, 45 and 180 in preparation).
  • Nominal pressure:280 bar.
  • Peak pressure:350 bar.
  • Regulating and control devices:
    – Two point control, directly operated.
    – Pressure control.
  • with flow control: hydraulic.
  • with flow control: electronic.
  • with remote pressure control: hydraulic, or electric.
  • Power (torque) control:
    – with pressure control.
    – with remote pressure control.
    – with pressure and flow control.
    – with separate flow control.
Internal gear pumps
  • Displacement from 1.7 to 250 cm³.
  • Nominal pressures up to 315 bar.
  • Max. speeds up to 3,600 rpm.
  • Max. power up to 95 kW.
  • High degree of efficiency due to complete sealing gap compensation.
External Gear Pumps
  • Displacements from 1 to 56 cm³.
  • Nominal pressures up to 280 bar.
  • Pressure-dependent gap sealing.
  • High precision of production.
  • Optimum level of efficiency.
  • High load capacity.
  • Application areas

* General machine construction.

* Material handling.

* Agricultural engineering.

* Construction machinery.

Fixed Displacement Bent Axis Pump A2FO series
  • Size 5, nominal pressure: 4,600/5,100 psi (315/350 bar).
  • Sizes 10 to 200, nominal pressure 5,800/6,500 psi (400/450 bar).
  • Sizes 250 to 1,000, nominal pressure: 5,100/5,800 psi (350/400 bar).
  • This axial piston bent axis design pump is suitable for hydrostatic drives in open circuits.
Axial Piston Variable Pump A7VO Series
  • Sizes 28…160 nominal pressure 350 bar.
  • Peak pressure 400 bar.
  • Open circuit.
  • Variable pump with axial tapered piston rotary group of bent axis design for hydrostatic drives in open circuit.
  • Use in mobile and industrial applications.
  • The output flow is proportional to the drive speed and pump displacement and is steplessly variable between maximum  and zero (qv max to qv min = 0).
  • Wide selection of regulating and control devices.
  • Rugged, compact bearing system with long service life
Directional spool valves, direct operated, with solenoid actuation Models WE Directional Control Valves
  • Wet-pin AC or DC solenoids.
  • Solenoids with detachable coil.
  • For subplate mounting (“P”): Porting pattern to DIN 24340 form A and ISO 4401.
  • Electrical connection as individual connection or central connection.
  • Optional inductive position monitoring (RE 24830).
  • Smooth switching characteristics.
Directional spool valves, direct operated, with manual actuation Models WMM, WMR, and WMU Directional Control Valves
  • Sizes 4 to 22.
  • Porting pattern to DIN 24340 form A and ISO 4401.
  • Operation by means of
    * lever (type WMM)
    * roller (type WMR, WMU)
Double throttle check valves in sandwich plate design Model Z2FS Flow Control Valves
  • Sizes 6 to 22.
  • Porting pattern to DIN 24340 form A and ISO 4401.
  • For limiting the main or pilot flow of  one or two actuators.
  • Meter-in or meter-out throttling.
Pressure relief valves in sandwich plate design, pilot operated Model ZDB and Z2DB Pressure Relief Valves
  • Sizes 6 and 10.
  • Porting pattern to DIN 24340 form A and ISO 4401.
  • 4 pressure stages: 50, 100, 200, 315 bar.
  • 5 pressure relief functions: A – T, P – T, B – T, A – T and B – T, A – B and B – A.
Pilot operated check valves in sandwich plate design Model Z2S Check Control Valves
  • Sizes 6 to 22.
  • Porting pattern to DIN 24340 form A and ISO 4401.
  • For the leak-free isolation of one or two actuator ports.
  • Various opening pressures.
Pressure relief valves, direct operated Model DBD Pressure Relief Valve
  • Sizes 6 to 30.
  • For subplate mounting (“P”).
  • For threaded connection (“G”).
  • As cartridge valve (“K”).
  • Type-tested safety valves in accordance with Pressure Equipment Directive 97/23/EC.
Hydraulics Application: Directional poppet valves, direct operated Models SED and SEW Directional Control Valves
  • Sizes 6 and 10.
  • Porting pattern to DIN 24340 form A and ISO 4401.
  • Leak-free isolation of closed port.
  • Solenoids with detachable coil.
  • Pressure-tight chamber needs not to be opened for changing the coil (type SED).
  • Reliable switching when under pressure over longer periods of standstill
X