Parker
Parker Commercial Hydraulics
Roller Bearing Gear Pump P30/31, P50/51, P75/76 Series
  • Working pressures to 2500 psi working pressures to 2500 psi.
  • Speeds up to 2400 rpm.
  • Robust cast iron construction.
  • A wide selection of standard shaft and mounting configuration.
  • Multiple sections are available.
  • Optional priority, two-speed, and unloader valves are available.
  • Single and Multiple pump/motor, Flow Divider, Piggyback and        Winch Motor configurations are available.
Rotary Flow Divider Intensifier FD30, FD50, FD75 series
  • This eguipment divides a single oil flow input into
    several output streams, in direct proportion to the
    gear widths used.
  • The Rotary Flow Divider also acts as an
    intensifier, transferring energy from
    total oil flow to that portion
    being used.
Multiple Section Pump
  • Available in up to five pump sections,
    providing five separate flows from a single
    output drive.
  • The individual flows can be tailored to suit
    most requirements over a range of speeds.
Bush Bearing Pumps P315, P330, P350, P360 series
  • Working pressures to 3500 psiWorking pressures to 3500 psi.
  • Patented interlocking body design.
  • Bronze thrust plates.
  • Tandem, triple and cross-frame pumps available.
  • Wide range of integral valves for power steering, power brakes, fan drives and implement hydraulics.
  • Reduced system noise levels compared to earlier models and   competitors’ pumps.
  • High power through-drive capability.
Fixed Displacement Gear Pumps and Motors
  • Commercial’s extensive range, with displacements
    from 10.6 to 249.9 cm³/r and working pressure to 3500 psi,
    can handle the most difficult and heavy work loads,
    efficiently and effectively.
  • A wide sellection if standart shaft and mounting
    configurations is available to suit most drive requirements.
Sectional Directional Control Valve DVA 20/35
  • Maximum flow rate 40 GPM.
  • Maximum operating pressure 2500 psi (172 bar).
  • Paralel and series circuit.
Sectional Directional Control Valve DVG 20/35
  • Maximum flow rate 70 GPM.
  • Maximum operating pressure 3500 psi (241 bar).
  • Paralel and series circuit.
Sectional Directional Control Valve DVG 20/35 with Selenoid Operated
  • Maximum flow rate 40 GPM / 70 GPM.
  • Maximum operating pressure 2500 psi (172 bar).
  • Paralel and series circuit.
X